THE MOBILE APP

Overview

In this day and age, most people have a SMART phone which runs an app / program. We have design the Proteus IoT Builder App which is available in the Apples APP Store or Googles Play store.

Download and Installation

Android App

On your Android phone, open Google Play and search for 'IoT Builder' and install

iOS App

On your iPhone phone, open your App Store and search for 'IoT Builder' and install.

You need to have the Bonjour utility installed on your PC in order for the App to control the running simulation. If it is not already installed you can install it directly from the Labcenter Program Group on the Start Menu.

Discovery

There is one menu which is at the top left:

This will open the following menu:

Click on 'Discover Appliances' and it will begin searching for any running Proteus simulation on the same network. It uses Zeroconf/Bonjour (as supported by Android or IoS) to look for any appliances (built with IoT Builder) on the local network. Both actual appliances and VSM simulations announce themselves using Zeroconf so hence the app can find either.

When it locates a simulation, it will loads its panel on to the main screen. Select this to run and control the simulation on your phone. To close the app, simply click the back button or your home screen button.

Note that this does not stop the simulation on the Hardware or the PC. This needs to be done either by unplugging the Yun or stopping the simulation in Proteus.

Contact Information and the App version number is found at the bottom of the menu under 'Labcenter'.